Home EDITORIAL BOARD International Editorial Board
INTERNATIONAL EDITORIAL BOARD MEMBERS
 
Professor Dr. Erich Hahne
Institute of Thermodynamics and Heat Transfer
Universität Stuttgart, Germany
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Viktor P. Astakhov
2186 Woodleaf St. Okemos, MI 48864
University of Michigan, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Hojat Adeli
College of Engineering, Ohio State University
Columbus, OH 43210 U.S.A.
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ferri M. H. Aliabadi
Head of Department, Aeronautics, Imperial College
South Kensington Campus, London, UK
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Kevin L. Edwards
School of Engineering, University of Derby, UK
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. M.L. Wyszynski
School of Eng., University of Birmingham, UK
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Goodarz Ahmadi
Department of Mechanical and Aeronautical Eng.
Dean, Wallace H. Coulter School of Engineering
Clarkson University, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Dennis Assanis
Director, Automotive Research Center
Mechanical Eng. Dept, Uni. of Michigan, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. David Hui
Director, Composite Material Research Laboratory
University of New Orleans, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. S. A. Sherif
Department of Mechanical and Aerospace Engineering
University of Florida, USA.
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Xianguo Li
Department of Mechanical and Mechatronics Engineering
University of Waterloo, Canada
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Jamil A. Khan
Chair, Department of Mechanical Engineering
University of South Carolina, Columbia, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Guoqiang Li
Department of Mechanical Engineering
Louisiana State University, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ibrahim Dincer
Faculty of Engineering and Applied Science
University of Ontario Institute of Technology (UOIT), Canada
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Chang Sik Lee
School of Mechanical Engineering
Hanyang University, Seoul, South Korea
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Joong Hee Lee
Dept of Polymer & Nano Engineering
Chonbuk National University, South Korea
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Gui Rong Liu
Department of Mechanical Engineering
National University of Singapore, Singapore
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Behrouz Gatmiri
Université Paris-Est, France
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. A.K.M. Sadrul Islam
Department of Mechanical and Chemical Eng.
Islamic University of  Technology (IUT),
The Organization of the Islamic Conference (OIC), Dhaka, Bangladesh
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Bekir Sami Yilbas
Department of Mechanical Engineering,
King Fahd University of Petroleum and Minerals, Saudi Arabia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Mohamad Kamal Bedewy
Department of Mechanical Design and Production, Faculty of Engineering
Misr University for Science and Technology, Egypt
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Kikou Kishimoto
Department of Mechanical Sciences and Engineering
Tokyo Institute of Technology, Japan
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Genki Yagawa
Director, Center for Computational Mechanics Research, Faculty of Engineering
Toyo University, Japan
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ing. Livan Fratini
Dept. of Mechanical Technology, Production and Management Engineering,
University of Palermo, Palermo, Italy
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor René de Borst
School of Engineering
University of Glasgow Rankine Building
Oakfield Avenue Glasgow G12 8LT, UK
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Pradeep K. Sen
Department of Applied Mechanics, IIT Delhi, New Delhi, India
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Viggo Tvergaard
Department of Mechanical Engineering
Technical University of Denmark, Denmark
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Mousa S.Mohsen 
Dean, Scientific Research and Graduate Studies
Hashemite University, Zarqa 13115 Jordan
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. T. S. Zhao
Department of Mechanical Engineering
The Hong Kong University of Science & Technology, Hong Kong
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ir. Joost Duflou
Department of Mechanical Engineering, Katholieke Universiteit Leuven
Heverlee-Leuven, Belgium
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Antti Samuli Korhonen
Department of Materials Science and Engineering
Helsinki University of Technology, Finland
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. June-Yule Lee
Department of Marine Engineering
National Kaohsiung Marine University, Taiwan
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. S. Srinivasa Murthy
Department of Mechanical Engineering
Indian Institute of Technology Madras, Chennai, India
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
  
Professor Dr. Youssef A. Shatilla
Masdar Institute of Science and Technology          
Abu Dhabi, UAE
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ir. Marc Geers
Department of Mechanical Engineering
Eindhoven University of Technology, Netherlands
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Ing Ľubomír Šooś
Dean Faculty of Mechanical Engineering
Slovak University of Technology, Bratislava, Slovak Republic
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it   
 
Professor Dr. K. V. Sharma
Centre for Energy Studies,
J.N.T.U. College of Engineering,
Jawaharlal Nehru Technological University,
Hyderabad, Andhra Pradesh, India
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
  
Professor Dr. Luis Filipe Martins Menezes
Department of Mechanical Engineering
Coimbra University, Portugal
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Talal Yusaf
Mechanical & Mechatronic Engineering     
University of Southern Queensland, Australia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Dr. Kumar Vikram Singh
Department of Mechanical and Manufacturing Engineering, Miami University, USA
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it