Home EDITORIAL BOARD Local Editorial Board
PDF Print
ADVISOR
Professor Dato’ Dr. Daing Nasir Ibrahim
Vice Chancellor, Universiti Malaysia Pahang, Kuantan, Malaysia

Professor Dr. Rosli Abu Bakar 
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Kuantan, Malaysia

EDITOR-IN-CHIEF 
Professor Dr. Md. Mustafizur Rahman
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it ; This e-mail address is being protected from spambots. You need JavaScript enabled to view it ; This e-mail address is being protected from spambots. You need JavaScript enabled to view it  
 
Dr. Muhamad Mat Noor
 

ASSOCIATE EDITOR-IN-CHIEF

Associate Professor Dr. Kumaran Kadirgama
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Malaysia
 
Dr. Devarajan Ramasamy
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Malaysia
Email:  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
LOCAL EDITORIAL BOARD MEMBERS 
 
Professor Dr. Masjuki Hj. Hassan
Department of Mechanical Engineering, Faculty of Engineering Universiti Malaya, Kuala Lumpur, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Mohd Nasir Tamin
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Mohd Zamri Yusoff
Dean, College of Engineering, Universiti Tenaga Nasional, Bangi, Selangor, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Ir. Dr. Zahari Taha
Dean, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Kuantan, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. A. K. M. Nurul Amin
Department of Manufacturing and Materials Engineering
Faculty of Engineering, International Islamic University Malaya, Kuala Lumpur, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it  
 
Professor Dr. Hanafi Ismail
School of Materials and Mineral Resources Engineering  
Universiti Sains Malaysia, Penang, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Ir. Dr. Ramesh Singh

Department of Mechanical Engineering, Faculty of Engineering

Universiti Malaya, Kuala Lumpur, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it  
 
Professor Dr. Md. Abdul Maleque
Department of Manufacturing and Materials Engineeing
International Islamic University Malaysia
53100 Gombak, Kuala Lumpur, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Abdul Rashid Abdul Aziz
Department of Mechanical Engineering
Universiti Teknologi Petronas, Perak, Malaysia 
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Professor Dr. Zainal Alimuddin Zainal Alauddin
School of Mechanical Engineering
University Sains Malaysia, Penang, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Aidy Ali
Department of Mechanical Engineering 
National Defence University of Malaysia (UPNM), Serdang, Malaysia
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it