Home ARCHIVE VOLUME 14 ISSUE 1 (MARCH 2017)
VOLUME 14 ISSUE 1 (MARCH 2017) PDF Print E-mail
Written by MD. Mustafizur Rahman   

CONTENTS

 

No.
Title and Authors
Page
 
 
 
1
Effect of tensile strain rates on flow stress for extruded AZ31 and AZ61 magnesium alloys
N. Abdul Latif, Z. Sajuri and J. Syarif

3812
2
Stress corrosion damage on austenitic stainless steel in sodium chloride
N. Islami, S. Rashid, A.K. Ariffin and M.Z. Nuawi

3824
3
Buckling behaviour of imperfect axially compressed cylinder with an axial crack
O. Ifayefunmi and S. H. Sheikh Md Fadzullah

3837
4
Morphological analysis of injected sprays of different bio-diesel fuels by using a common rail setup controlled by a programmable electronic system
P. Visconti, P. Primiceri, L. Strafella, A.P. Carlucci and A. Ficarella

3849
5
Structural and mechanical characterisation of the chromium nitride hard coating deposited on the silicon and glass substrate
Hetalkumar N. Shah

3872
6
Dynamics properties of a Go-kart chassis structure and its prediction improvement using model updating approach
N.A.Z. Abdullah, M.S.M. Sani, N.A. Husain, M.M. Rahman and I. Zaman

3887
7
Automobile spare-parts forecasting: A comparative study of time series methods
C.A. González Vargas and M. Elizondo Cortés

3898
8
Experimental investigation on the performance of the TiO2 and ZnO
hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining
N.S.M. Sahid, M.M. Rahman, K. Kadirgama, D. Ramasamy, M.A. Maleque and M.M. Noor

3913
9
Physico-mechanical properties of coir and jute fibre reinforced hybrid polyethylene composites
Shakil Ahmed, Ashraful Ahsan and Mahbub Hasan

3927
10
Computation of turbulent flow around a square block with standard and modified
k-ε turbulence models
A. Rusdin

3938
11
Emission from a dual fuel operated diesel engine fuelled with Calophyllum Inophyllum biodiesel and producer gas
S.K. Nayak and P.C. Mishra

3954
12
A performance investigation on IoT enabled intra-vehicular wireless sensor networks
Md. Arafatur Rahman, Jahan Ali, Muhammad Nomani Kabir and Saiful Azad

3979
13
Evaluation of alternative drive systems based on driving patterns comparing Germany, China and Malaysia
M. Schüller, S. Tewiele, T. Bruckmann and D. Schramm

3985
14
Finite element analysis of diffusion effects on convective heat and the mass transfer of two fluids in a vertical channel
B. Suresh Babu, G. Srinivas and G.V.P.N. Srikanth

3998
15
Thermal stability analysis of functionally graded plates using simple refined plate theory
Mokhtar Bouazza, Abderrahmane Boucheta, Tawfiq Becheri and Noureddine Benseddiq

4013
16
Performance and emission characteristics of micro gas turbine engine fuelled with bioethanol-diesel-biodiesel blends
N. Saifuddin, H. Refal and P. Kumaran

4030
17
Multidisciplinary design optimisation methods for automotive structures
R.D. Bäckryd, A.B. Ryberg and L. Nilsson

4050
18
Archachatina marginata bio-shells as reinforcement material in metal matrix composites
M.Y. Kolawole, J.O. Aweda and S. Abdulkareem

4068
19
Fatigue life prediction of titanium alloy for block loading using the hybrid approach of critical plane and continuum damage mechanics
M. Kamal and M.M. Rahman
4080