| UMP | International Journal of Automotive & Mechanical Engineering

Professor Dr. Masjuki Hj. Hassan

Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Ahmad Kamal Ariffin

Department of Mechanical and Materials Eng., Faculty of Engineering,

Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Mohd Nasir Tamin

Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Mohd Zamri Yusoff

Dean, College of Engineering, Universiti Tenaga Nasional, Bangi, Selangor, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. A. K. M. Nurul Amin

Department of Manufacturing and Materials Eng., Faculty of Engineering,

International Islamic University Malaya, Kuala Lumpur

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Ir. Mohd Sapuan Salit

Department of Mechanical and Manufacturing Engineering, Faculty of Engineering,

Universiti Putra Malaysia, Serdang, Selangor, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Hanafi Ismail

School of Materials and Mineral Resources Eng., Universiti Sains Malaysia, Penang, Malaysia.

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Dr. Abdul Rashid Abdul Aziz

Department of Mechanical Engineering, Universiti Teknologi Petronas, Malaysia 

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Professor Ir. Dr. Ramesh Singh

Director, Research Management Center, Universiti Tenaga Nasional, Bangi, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Associate Professor Dr. Zainal Alimuddin Zainal Alauddin

School of Mechanical Eng., University Sains Malaysia, Penang, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Dr. Aidy Ali
Department of Mechanical and Manufacturing Engineering, Faculty of Engineering,

Universiti Putra Malaysia, Serdang, Selangor, Malaysia

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it